Customade Table

Aluminium

This metal, known for its stability, can resist frost, high temperatures and prolonged exposure to the sun.
Easy to clean as follows: dust the surface with a soft cloth, then use cold water and a
non-aggressive or abrasive detergent (neutral soap is fine). Do not bleach.
Avoid letting the dirt stains on the surface age, other wise complete removal of the stains
is not guaranteed: cleaning immediately means obtaining better results with less effort!
To avoid streaks, always remove the detergent, rinse and dry thoroughly. If you are using
detergents or solvents that you are unsure of, it is advisable to make a preliminary test in
an out of sight corner of the product.

Ceramic

Ceramic tops do not require any particular maintenance, thanks to the high resistance and stability of the material.
Cleaning can be carried out very simply using soft and clean cloths soaked in
water, possibly adding detergents of common household use with neutral pH or
natural vinegar.
Dry the surface after cleaning is complete. Do not use metal or abrasive brushes.
The use of products containing waxes, brighteners, strong acids (eg hydrofluoric,
sulfuric, etc.) is not recommended because they could permanently damage the
surface.

TYPE OF STAIN FIRST OPERATION SECOND OPERATION
Cement, limestone, metal scratch,
rust.
Clean with water as soon as
possible, softly rubblig with
a cloth
Fila Deterdeck, cement descaler
Grease, food, rubber, dye, marking
pen, blood, etc.
Clean with water as soon as
possible, gently rubblig with
a cloth
Fila PS87
Graffiti, varnish, paint Clean with water as soon as
possible, gently rubblig with
a cloth
Fila NoPaint Star, solvent
Coffee, tea, juice, soda Clean with water as soon as
possible, gently rubblig with
a cloth
Fila NoPaint Star, solvent
Candle wax or wax for scratch repairs,
tree resin or adhesive tape traces
Clean with water as soon as
possible, gently rubblig with
a cloth
Filasolv, solvent
Silicone sealant Clean with water as soon as
possible, gently rubblig with
a cloth
Fila Zero Sil, acetone

HPL

KIND OF IMPURITY/DIRT WHAT YOU NEED CLEANING METHOD
dust, pencil, coffee, tea, fruit juice,
syrups, jam, milk.
absorbent paper Apply the detergent. Allow it to work
for a short time according to the
degree of the dirt. Remove the
detergent with a sponge, rinse and
wipe off with absorbent paper/cloth.
soft cloth
sponge
non abrasive detergents
water
limescale traces and marks absorbent paper Apply the detergent (it may contain acetic acid or
citric acid 10% max.solution). Allow it to work for
a short time according to the degree of the dirt.
Remove the detergent
with a sponge, rinse and wipe off with absorbent
paper/cloth.
soft cloth
sponge
non abrasive detergents
water
grease, oil, fingerprints, felt-tip pens,
ballpoint pen ink, rubber marks, tar
traces, wine, liquors, lipstick, face
powder, nail polish, shoe cream,
floor wax
absorbent paper Use a detergent and/or proper organic solvents
(acetone, ethyl alcohol, benzine, perchloroethylene, MEK-methyl ethyl ketone, etc.). Allow it to work
for a short time according to the degree of the dirt.
Remove the detergent or the organic solvent with
the sponge, rinse and dry wipe with paper/cloth.
soft cloth
sponge
non abrasive detergents
water
organic solvents
traces of candle wax wooden or synthetic palette
knife
Remove the hardened wax with the
palette knife. Wipe off any residue
with hot water and dry wipe
afterwards with absorbent paper. absorbent paper
water
bacteriological traces (blood, urine,
faeces, pathogenic germs, etc.)
absorbent paper Apply water and soap and/or water
and detergent.
Allow it to work for a short time
according to the degree of the dirt.
Remove the soap/detergent with a
sponge, rinse and dry wipe with
absorbent paper. Sanitize with
disinfectant products and/or steam.
Dry wipe.
soft cloth
sponge
non abrasive detergents
liquid or solid soap
disinfectant products
water
paint sprinkles and traces containing
solvents, dye stains, glue, adhesive
traces coming from the removal of
laminate protective films
soft cloth Apply a proper organic solvent
(acetone, ethyl alcohol, benzine,
perchloroethylene, MEK-methyl
ethyl ketone, etc.) Allow it to work
for a short time according to the
degree of the dirt. Remove the
organic solvent, soap, rinse and dry
wipe with absorbent paper or cloth.
organic solvents
liquid or solid soap
absorbent paper
water
silicone rubber cement or other
silicone products traces
these substances should not be left in contact with
the laminate surface for a long period of time