Koru Table

ALUMINUM
Aluminium is a light and strong metal with excellent strength-to-weight ratio and corrosion resistance. These properties make it an ideal material for outdoor
furniture. Despite its light weight, aluminium is durable and is coated with polyester electrostatic powder coating for added protection against knocks and
scratches and to add colour to the product. As the powder coating adheres better to the metal, it also makes the product much more resistant to fading.
JOTUN and Akzo Nobel branded powder coatings are used in YAAZ aluminium products.

ALUMINUM COATING
JOTUN powder coatings used in YAAZ products have been tested against high amounts of UV radiation and strong winds. In addition, powder coatings have
been tested in some of the hottest, most humid and corrosive environments in the world, such as Southeast Asia and the Middle East.

CONCRETE COATING
The stone effect paint collection, developed with the cement spraying method, offers a great alternative for aesthetic surfaces in outdoor products

Cleaning and Using Instructions
Over time with exposure to the elements, powder coatings may show signs of weathering such as loss of gloss, chalking and slight colour change. A simple
regular clean will minimize the effects of weathering and will remove dirt, grime and other build-up detrimental to all powder coatings.
For any particular region or territory, there may be local regulations or local requirements to be met in order to achieve conformance to certain published
quality labels or standards. It is the users’ responsibility to be aware of such standards.
Failure to comply with the recommended cleaning schedule will nullify anywarranties.
Cleaning should start at the time the products are installed, ensuring that construction materials such as concrete, plaster and paint splashes are removed
before they have a chance to dry. Failure to remove these materials at this early stage will require the use of aggressive cleaning materials and techniques
with potential damage to the powder coated surface.
Best cleaned by regularly washing the coating using warm water and a non-abrasive, pH neutral detergent solution. Surfaces should be rinsed thoroughly
after cleaning to remove all residue. All surfaces should be cleaned using a soft cloth or sponge or something harder than a soft natural bristle brush.
If the project is subject to any hazardous unusual environmental factors, or is close to salt water, an estuary or marine environments then YAAZ must be
consulted on an individual project basis.
Renovation can be required in the case of heavy soiling (due to lack of maintenance).
In no circumstance should any abrasive cleaner or polish, or any cleaner containing ketones, esters beused.

NATURAL CERAMIC
Natural Ceramic is opaque and has a tactile quality. This surface has a slightly burnished look that makes it soft and inviting. Careful selection of high-quality
raw materials creates a surface with delicate color effects and an extraordinary illusion of depth.
POWERFUL ACTION
Eliminates microbes and prevents their reproduction 24 hours a day, with and without sunlight, providing always-active protection.
Thanks to the technology permanently integrated into the product, it offers eternal effectiveness. The reinforcing fiberglass mesh adds
extraordinary resistance. Highly eco-friendly, it uses less raw materials, resulting in lower water and energy consumption and reduced
CO2 emissions

Cleaning and Using Instructions
Use warm water and a high-quality microfibre cloth. If needed, use warm water with a very diluted neutral detergent (one cap in 5 litres
of water). When finished, always rinse with water and a clean microfibre cloth